Turnbuckles Eye & Eye

Thread Dia.& Take Up (in.) Working Load Limit (lbs.) Weight Each (lbs.) Dimensions (in.)
A J Open K  Closed M  Open N  Closed R S X  Closed BB
1/4x4  500 0.30 0.25 11.80 7.80 12.25 8.25 0.78 0.34 1.75 4.00
5/16x4-1/2 800 0.47 0.31 13.56 9.06 14.12 9.62 0.94 0.44 2.09 4.50
3/8x6 1200 0.75 0.38 17.47 11.47 18.16 12.16 1.12 0.53 2.52 6.00
1/2x6 2200 1.60 0.50 19.08 13.08 19.96 13.96 1.44 0.72 3.23 6.00
1/2X9 2200 1.83 0.50 25.08 16.08 25.96 16.96 1.44 0.72 3.23 9.00
1/2x12 2200 2.08 0.50 31.08 19.08 31.96 19.96 1.44 0.72 3.23 12.00
5/8x6 3500 2.75 0.63 20.68 14.68 21.68 15.68 1.75 0.88 3.90 6.00
5/8x9 3500 3.13 0.63 26.68 17.68 27.68 18.68 1.75 0.88 3.90 9.00
5/8x12 3500 3.50 0.63 32.68 20.68 33.68 21.68 1.75 0.88 3.90 12.00
3/4x6 5200 3.89 0.75 22.38 16.38 23.62 17.62 2.09 1.00 4.69 6.00
3/4X9 5200 4.61 0.75 28.38 19.38 29.62 20.62 2.09 1.00 4.69 9.00
3/4x12 5200 5.43 0.75 34.38 22.38 35.62 23.62 2.09 1.00 4.69 12.00
3/4x18 5200 7.25 0.75 46.38 28.38 47.62 29.62 2.09 1.00 4.69 18.00
7/8x12 7200 8.10 0.88 35.32 23.32 36.82 24.82 2.38 1.25 5.10 12.00
7/8X18 7200 9.95 0.88 47.32 29.32 48.82 30.82 2.38 1.25 5.10 18.00
1X6 10000 9.33 1.00 25.97 19.97 27.72 21.72 3.00 1.44 6.36 6.00
1X12 10000 11.93 1.00 37.97 25.97 39.97 27.72 3.00 1.44 6.36 12.00
1X18 10000 14.00 1.00 49.97 31.97 51.72 33.72 3.00 1.44 6.36 18.00
1X24 10000 17.25 1.00 61.97 37.97 63.72 39.72 3.00 1.44 6.36 24.00
1-1/4x12 15200 19.00 1.25 40.31 28.31 42.56 30.56 3.56 1.81 7.72 12.00
1-1/4x18 15200 23.00 1.25 52.31 34.31 54.56 36.56 3.56 1.81 7.72 18.00
1-1/4x24 15200 27.00 1.25 64.31 40.31 66.56 42.56 3.56 1.81 7.72 24.00
1-1/2x12 21400 27.50 1.50 42.50 30.50 45.00 33.00 4.06 2.12 8.62 12.00
1-1/2x18 21400 31.00 1.50 54.50 36.50 57.00 39.00 4.06 2.12 8.62 18.00
1-1/2x24 21400 37.50 1.50 66.50 42.50 69.00 45.00 4.06 2.12 8.62 24.00
1-3/4x18 28000 52.50 1.75 57.38 39.38 60.38 42.38 4.62 2.38 10.00 18.00
1-3/4x24 28000 58.00 1.75 69.38 45.38 72.38 48.38 4.62 2.38 10.00 24.00
2x24 37000 85.25 2.00 75.69 51.69 79.19 55.19 5.57 2.69 13.09 24.00

Hot dip galvanized • End fittings are quenched and tempered, bodies are normalized

Warning, Never exceed published working load limit. Always read and understand the general warnings and information page